For streetlights, LED lighting has proven to be a great choice, reducing crime rates and keeping streets safe. While their bright, white light is one of their best qualities, it can also be hard on the eyes, particularly in the dark night sky. LED lights have a positive effect on productivity and energy efficiency in commercial interior lighting, such as for offices and retail shops because they provide bright, even light. Parking lots, stadiums, and other outdoor spaces that require crane truck services and specialized equipment benefit from large-scale exterior lighting solutions that utilize LEDs because of their energy-saving and low-maintenance requirements.
The use of LEDs for roadways and street lights is another area where LEDs continue to gain popularity. There is some evidence that LED lights reduce light pollution, as well as creating a better driving and walking experience for pedestrians and drivers.
Discover some of the unique benefits of LED street lighting, as well as why so many towns and cities are using this technology for their roadway lighting.
Environment Friendly LED street lights
Light pollution refers to the artificial light emitted by skyscrapers and other large buildings, but street lamps, sidewalk lights, and highway lights also contribute significantly to light pollution in metropolitan areas.
In the beginning, LED street lamps emitted a cold, bright, blue light, which caused more light pollution than heat. Because of that, the fixtures that originally housed the LEDs caused the light to spill out instead of focusing directly and directing it downward, which can significantly reduce the illumination of the sky at night.
Fortunately, experts addressed the issue. One of the future-centric benefits of LED street lights is the ability to focus the light pattern to the ground through an innovative redesign of the fixtures. Light pollution is significantly reduced while LEDs continue to produce their bright, consistent light.
LEDs are also known for their green properties, most notably for their ability to reduce light pollution while at the same time being energy efficient. LEDs reduce the energy consumption of large-scale lighting systems used in warehouses and other commercial buildings, and these savings increase when these systems are applied to entire communities.
Unlike traditional exterior HID lighting such as high-pressure sodium and mercury vapor lamps, LEDs do not contain toxic chemicals like mercury, which can pollute the environment.
LEDs that turn full-brightness instantly
LEDs are known for their brightness and that is one of the reasons they are such a good lighting solution for factories and workplaces so that productivity is maintained and workers are kept protected from injury. The brightness of LED street lights, or, in more precise terms, their immediate brightness, is one of the biggest advantages of the technology.
The light generated by LEDs is a result of an electric current rather than heating a filament like an incandescent lamp or high intensity discharge lamp, thus it comes to full brightness instantly.
In addition to avoiding a warm-up time where the street lamps fixtures might not be able to generate enough light to safely cover an area, these fixtures can also be controlled by occupancy sensors, which can turn them on in full as soon as someone reaches the area.
Glare from LED street lights is reduced
Lights from these street lamps can cause glares and reflect into apartments in larger cities. With the new research into low glare LED lighting, it will be possible to create an energy efficient and comfortable LED light. Researchers have discovered that by using interconnected wiring, the light can be powered at a lower voltage, thereby reducing glare. As a result of interconnected wiring, LED lighting would also be cooler, since heat is their number one enemy. Furthermore, even if one of the diodes failed, the light would still shine.
Light emitting diodes produce “directional” light, which is emitted in one direction instead of diffusing on the surface. Also, unlike some other forms of exterior lighting, LEDs are easily dimmable, so it’s easier to adjust brightness or add additional energy-saving controls to fixtures.
Maintenance is less of a concern with LED street lights
When determining the right lighting solutions for businesses, pubs, and shopping centers, ambiance and atmosphere are very important factors to consider. However, accessibility is also crucial when determining the right lighting solutions for larger facilities, building exteriors, and street lighting.
A difficult-to-access lighting system can all but guarantee higher maintenance costs for facilities using incandescents and halogens. Additionally, routine maintenance can cost large facilities and communities a lot more than one would expect in light of the inherently higher cost of energy usage and the operational costs of accessing lighting fixtures with specialty equipment.
In addition to being more energy-efficient, LED street lights require less maintenance than their fluorescent and HID counterparts. In addition to their long life (they can last up to a hundred thousand hours), LEDs are usually less maintenance-intensive than HIDs or incandescent fixtures, which require lamp and/or ballast replacement fairly frequently. For street lighting fixtures that are inaccessible and expensive, this is especially beneficial.
LEDs that turn full-brightness instantly
LEDs are known for their brightness and that is one of the reasons they are such a good lighting solution for factories and workplaces so that productivity is maintained and workers are kept protected from injury. The brightness of LED street lights, or, in more precise terms, their immediate brightness, is one of the biggest advantages of the technology.
The light generated by LEDs is a result of an electric current rather than heating a filament like an incandescent lamp or high intensity discharge lamp, thus it comes to full brightness instantly.
In addition to avoiding a warm-up time where the street lamps fixtures might not be able to generate enough light to safely cover an area, these fixtures can also be controlled by occupancy sensors, which can turn them on in full as soon as someone reaches the area.
Glare from LED street lights is reduced
Lights from these street lamps can cause glares and reflect into apartments in larger cities. With the new research into low glare LED lighting, it will be possible to create an energy efficient and comfortable LED light. Researchers have discovered that by using interconnected wiring, the light can be powered at a lower voltage, thereby reducing glare. As a result of interconnected wiring, LED lighting would also be cooler, since heat is their number one enemy. Furthermore, even if one of the diodes failed, the light would still shine.
Light emitting diodes produce “directional” light, which is emitted in one direction instead of diffusing on the surface. Also, unlike some other forms of exterior lighting, LEDs are easily dimmable, so it’s easier to adjust brightness or add additional energy-saving controls to fixtures.
Maintenance is less of a concern with LED street lights
When determining the right lighting solutions for businesses, pubs, and shopping centers, ambiance and atmosphere are very important factors to consider. However, accessibility is also crucial when determining the right lighting solutions for larger facilities, building exteriors, and street lighting.
A difficult-to-access lighting system can all but guarantee higher maintenance costs for facilities using incandescents and halogens. Additionally, routine maintenance can cost large facilities and communities a lot more than one would expect in light of the inherently higher cost of energy usage and the operational costs of accessing lighting fixtures with specialty equipment.
In addition to being more energy-efficient, LED street lights require less maintenance than their fluorescent and HID counterparts. In addition to their long life (they can last up to a hundred thousand hours), LEDs are usually less maintenance-intensive than HIDs or incandescent fixtures, which require lamp and/or ballast replacement fairly frequently. For street lighting fixtures that are inaccessible and expensive, this is especially beneficial.